Cutlery Cleaning & Polishing Systems RCC, RCD & CD
Option 1: Rosler Cutlery Cleaning System RCC (Models 2, 3, 4, 6)
Can be offered as stand-alone system or in combination with the RCD dryer outlined in option 2 below
- RCC Rösler Cutlery Cleaner + RCD Rösler Cutlery Dryer
- RCC Rösler Cutlery Cleaner + RCD Rösler Cutlery Dryer
- Cutlery Cleaning/Polishing
Application:
- Washing/Cleaning of cutlery after use as well
as spot-free drying and polishing in combination
with the RCD dryer
- All types of culery from pastry forks to soup spoons
- Cutlery made from stainless steel or silver can be
refurbished (i.e. corrosion spots and light scratches
can be removed)
- Linked intallation RCC with RCD
Advantages:
- Low personnel cost
- Low energy cost
- Low consumption of cleaning soap and water due to the fact
that the cleaning effect is mainly achieved with special
polishing media
- Continuous feed operation prevents food residues from
sticking to the cutlery. No pretreatment of the parts required
- System hygiene complies with DIN 10510:2008-06
- No static water: Prevents bacteria growth
- No negative impact on the room climate No mixing of cleaned
and dirty cutlery during the rinse cycle
- Rinsing
Process Steps:
- Cleaning of the cutlery → mechanical surface cleaning in polishing media. Depending on the degree of contamination, processing times may vary; however no precleaning is required
- Rinsing → takes place with fresh water
- Drying and polishing → RCD dryer with heated and sanitizing drying media
Option 2: Rosler Cutlery Dryer RCD (Models 1, 2, 2S (for silver products))
- RCD - Cutlery Dryer
Application:
- Spot free drying and polishing
- All types of cutlery from pastry forks to soup spoons
Advantages:
- Low personnel cost
- Low energy cost
- Duomatic 125 C
Option 3: Rosler Duomatic 125 C
Space saving cutlery cleaning, polishing and drying system – all in one!
Perfect combination for huge amounts of alltypes of cutlery – from small pastry forks to large soup ladles.
Three treatment stages in one system
- Cleaning of the cutlery
- Drying
- Polishing
Download Brochures
Option 4: Cutlery Dryer CD (Models 3000, 5000, 8000L)
- Cutlery Dryer and Polisher
The wet cutlery coming out of the dishwasher is placed into the cutlery drying/polishing system where the vibratory drive induces a spiral movement of parts and drying media through the spiral bottom process channel.
The media consists of a plant based, sanitizing fine particle granulate which dries and polishes the cutlery along with providing a spot free luster on the cutlery surface. The integrated heating system keeps the media at a constant preset temperature and causes the absorbed moisture to evaporate.
The cutlery, be it made from stainless steel or silver, leaves the dryer perfectly dry, shiny and sanitary.
- Cutlery Dryer and Polisher CD
Application:
- Spot free drying and polishing
- Cutlery of all types from pastry forks to soup spoons
Advantages:
- No manual drying and polishing after dish washing
- In a very short time the cutlery obtains a shine like new and
it is hygienically clean
- The CD system guarantees a consistently high surface quality
- Easy to operate
- The spiral bottom process channel ensures gentle, nick free processing
- All CD systems operate on a continuous feed basis
- The CD system is mounted on wheels making it easy to move
- Control panel integrated into machine frame CE-mark